licenserules

Colorado Springs, CO · Local contractor rules

Contractor license requirements in Colorado Springs, Colorado

What Colorado Springs requires before you work there, on top of Colorado state licensing. Checked November 6, 2026 from 8 official sources.

Do I need a Colorado Springs license to work there?

Yes. You need one Colorado Springs license. Which one depends on the work you do.

Contractor licensing for Colorado Springs is done by the Pikes Peak Regional Building Department, not by the city itself.12

More

PPRBD also issues building permits for Colorado Springs, unincorporated El Paso County, Fountain, Manitou Springs, Monument, Palmer Lake, Green Mountain Falls, Calhan and Woodland Park.

This is on top of the Colorado state license, if your trade has one. Check your trade

Pick your trade

Find your work below. Each row shows whether you need a Colorado state license and which Colorado Springs license is yours. Open a row for the full checklist.

Trades without a Colorado Springs license

A license is needed only for work that requires a permit. Cosmetic work such as interior and exterior painting, replacing cabinets and most appliances, carpet and other flooring, and concrete flatwork generally does not need a permit.23

How to start working in Colorado Springs

  1. 1

    Get your Colorado license if your trade needs one

    Colorado licenses some trades and not others. The trade list above shows the state rule for yours.

  2. 2

    Get a certificate of insurance

    The minimums depend on which license you get. They are listed in each license below.

  3. 3

    Apply for your Colorado Springs license

    Apply for the one that fits your work, with Pikes Peak Regional Building Department (PPRBD), Licensing Department.

    • Building Contractor A (A-1 or A-2, General Commercial)$50
    • Building Contractor B (B-1 or B-2, Limited Commercial)$50
    • Building Contractor C (Home Builder)$50
    • Building Contractor D-1 (Single Trade, including roofing and exteriors)$50
    • Wrecking Contractor D-2A or D-3B$50
    • Building Contractor E (Maintenance and Remodeling)$50
    • Building Contractor F (Solar Energy, F-1 Unlimited or F-2 Limited)$50
    • Mechanical Contractor A, B, C or D$50
    • Electrical contractor registrationNot published
    • Plumbing contractor registration$100

    What each license needs

  4. 4

    Pull a permit for each job

    For work that needs a licensed or registered contractor, permits are issued only to that contractor or a representative it authorizes.23

    More

    No permit is issued to a contractor without a current license or registration, with unpaid fees, or with a suspended or revoked license.

    Open the Colorado Springs permit portal

  5. 5

    Renew on time

    Licenses expire 12 months after issue and are renewed yearly by the examinee, online or with a notarized form.

    More

    Renewal within 45 days after expiration has no penalty; later renewals carry penalties of half, one or two times the fee, and after 180 days the contractor must reapply and retest.

Details for each Colorado Springs license type

You need only one of these: the one that fits your work.

Building Contractor A (A-1 or A-2, General Commercial) General contractorResidential builder Fee$50 Bond—

Who needs it

A-1 may contract for building, altering and repairing any type or size of structure.35

More

A-2 may do the same except Group A, E and I occupancies over 30,000 square feet and buildings that need Type I construction.

What you need

  • The examinee must pass ICC exam G11, National Standard General Building Contractor (A). Exams are scheduled with Pearson VUE.6

  • The application needs three PPRBD reference request forms documenting experience in the license type (not from relatives, spouses or PPRBD staff), photo ID, the liability insurance certificate, workers' compensation proof, a Colorado certificate of good standing, and copies of other licenses held. PPRBD runs a name-based judicial records check.7

Fees and bond

Application fee (new license, nonrefundable)3$50
Building Contractor A-1 or A-2, annual3$200

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, with PPRBD as certificate holder and a 10-day notice of cancellation or reduction.38

More

Workers' compensation if the business has employees, or an approved state rejection of coverage if it has none.

Renewal

Licenses expire 12 months after issue and are renewed yearly by the examinee, online or with a notarized form.134

More

Renewal within 45 days after expiration has no penalty; later renewals carry penalties of half, one or two times the fee, and after 180 days the contractor must reapply and retest.

Apply on the official site
Building Contractor B (B-1 or B-2, Limited Commercial) General contractorResidential builder Fee$50 Bond—

Who needs it

B-1 may build, alter and repair any occupancy except Group A, E, I or H and buildings needing Type I construction.35

More

B-2 covers nonstructural remodeling in the same occupancies, all Building Contractor C work, one-story Group B, F, M or S buildings up to 7,500 square feet, and Group R buildings up to 16 units and two stories.

What you need

  • The examinee must pass ICC exam G12, National Standard Building Contractor (B).6

  • The same application items as Building Contractor A apply, including three references.7

Fees and bond

Application fee (new license, nonrefundable)3$50
Building Contractor B-1 or B-2, annual3$175

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

Renewal

Renewed every year; see the late-renewal penalties under Building Contractor A.3

Apply on the official site
Building Contractor C (Home Builder) Residential builder Fee$50 Bond—

Who needs it

May build, alter and repair one- and two-family dwellings up to three stories and their accessory structures, and Group R-2 buildings up to eight units and two stories.35

More

With the building official's approval, may also do minor nonstructural repair and remodeling of other buildings except Group A, E, I and H occupancies and Type I buildings.

What you need

  • The examinee must pass ICC exam G13, National Standard Residential Building Contractor (C).6

  • The same application items as Building Contractor A apply, including three references.7

Fees and bond

Application fee (new license, nonrefundable)3$50
Building Contractor C, annual3$150

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.38

More

To get re-roofing permits, the certificate must state that re-roofing is included in, or not excluded from, the coverage.

Renewal

Renewed every year; see the late-renewal penalties under Building Contractor A.3

Apply on the official site
Building Contractor D-1 (Single Trade, including roofing and exteriors) RooferPool and spa contractor Fee$50 Bond—

Who needs it

Contractors working in a single trade, such as foundation repair, masonry, retaining walls, roofing, siding, stucco, glazing or swimming pools.357

More

The license allows work only in the trade named on it. A D-1 Exterior license covers roofing, stucco and siding.

What you need

  • D-1 Roofing and D-1 Exteriors examinees must pass ICC exam G14, National Standard Roofing Contractor.6

  • D-1 Exterior applicants need three references: one each for roofing, stucco and siding.7

Fees and bond

Application fee (new license, nonrefundable)3$50
Building Contractor D, Single Trade, annual3$100

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

More

For re-roofing permits, the certificate must say re-roofing is included in, or not excluded from, the coverage.

Renewal

Renewed every year; see the late-renewal penalties under Building Contractor A.3

Apply on the official site
Wrecking Contractor D-2A or D-3B Demolition contractor Fee$50 Bond—

Who needs it

D-2A may wreck any building. D-3B may wreck buildings up to and including two stories.35

What you need

  • D-2A applicants need at least four years of wrecking experience; D-3B applicants need at least two years.37

Fees and bond

Application fee (new license, nonrefundable)3$50
Wrecking Contractor A, annual3$125
Wrecking Contractor B, annual3$100

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate.38

More

For wrecking permits the certificate must state that explosion, collapse and underground (XCU) coverage is included or not excluded; the building official may waive this for an isolated building.

Renewal

Renewed every year; see the late-renewal penalties under Building Contractor A.3

Apply on the official site
Building Contractor E (Maintenance and Remodeling) HandymanFence contractor Fee$50 Bond—

Who needs it

May build, alter and repair structures accessory to one- and two-family dwellings that are not enclosed living space, such as decks, fences, sheds, patio covers and detached garages and workshops, and do interior nonstructural repair or remodeling of one- and two-family dwellings.45

More

PPRBD says a handyman who wants to do work beyond what is exempt from permits may request this license.

What you need

  • The examinee must pass ICC exam G13, National Standard Residential Building Contractor (C).6

Fees and bond

Application fee (new license, nonrefundable)3$50
Building Contractor E, annual3$75

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

Renewal

Renewed every year; see the late-renewal penalties under Building Contractor A.3

Apply on the official site
Building Contractor F (Solar Energy, F-1 Unlimited or F-2 Limited) Solar installer Fee$50 Bond—

Who needs it

F-1 may install all kinds of active solar heating and cooling systems and connect them to existing gas, plumbing and heating systems.57

More

F-2 may install the systems but all connections must be made by other properly licensed contractors.

What you need

  • Solar contractors must file a notarized Affidavit of Compliance with Solar Photovoltaic Installation Requirements each year and a copy of their NABCEP (PVIS or PVIP) certification before any permit or inspection.7

    More

    NABCEP is not required if the contractor also holds an electrical license and registration with PPRBD.

  • Solar PV systems of 300 kW design capacity or more must be permitted by a licensed and registered electrical contractor.7

Fees and bond

Application fee (new license, nonrefundable)3$50
Building Contractor F-1, annual3$100
Building Contractor F-2, annual3$75

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

Renewal

Renewed every year; the solar affidavit is also filed annually.37

Apply on the official site
Mechanical Contractor A, B, C or D HVAC contractor Fee$50 Bond—

Who needs it

A (commercial) covers gas piping, heating, ventilating and air conditioning in any structure.5

More

B (residential) covers the same in one- and two-family dwellings up to three stories. C is a single specialty: gas piping (C-1), commercial refrigeration (C-2), or residential maintenance, repair and replacement of existing systems (C-3). D covers manufactured buildings. Employees must also hold the proper license, such as Heating Mechanic I (gas fitter) or IV (HVAC service technician).

What you need

  • Exams: H-A takes ICC G29 Master Mechanical, H-B takes ICC F32 Residential Mechanical, H-C1 takes ICC G33 Master Gas Pipe Fitter, H-C2 takes exam 228 Colorado (Denver) Refrigeration Operator, and Heating Mechanic IV takes ICC G31 Journey Mechanical.6

  • A Heating Mechanic I applicant needs one year of gas pipe fitting and servicing experience.5

Fees and bond

Application fee (new license, nonrefundable)3$50
Mechanical Contractor A, B, C, D or E, annual3$100
Heating Mechanic I or IV, annual3$10

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

Renewal

Renewed every year; see the late-renewal penalties under Building Contractor A.3

Apply on the official site
Electrical contractor registration Electrician Fee— Bond—

Who needs it

Colorado-licensed electrical contractors. No license other than the state electrical contractor license is required, but the contractor must register with PPRBD.5

What you need

  • A current state license is a prerequisite. If the state license has expired at renewal time, an updated copy must be filed before the contractor can get permits.13

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

Renewal

Registrations expire 12 months after issue and are renewed yearly.3

Apply on the official site
Plumbing contractor registration Plumber Fee$100 Bond—

Who needs it

A plumbing contractor holding a State master plumber's license and registered with PPRBD may get plumbing permits without a separate local license.5

What you need

  • A current state license is a prerequisite for registration.3

Fees and bond

Plumbing contractor or water connected appliance contractor, annual3$100

Insurance

General liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, plus workers' compensation or an approved rejection of coverage.8

Renewal

Registrations expire 12 months after issue and are renewed yearly.3

Apply on the official site
  • Under the Pikes Peak Regional Building Code, a license or registration is needed to do any work that requires a permit, and it is a violation to contract for permitted work without one.3

  • Trades the State of Colorado licenses (electrical, plumbing, conveyance and manufactured building installers) do not take a PPRBD exam; those contractors register with PPRBD using their current state license.34

  • Each license names an examinee, an individual who passed the required exam, was found qualified by a PPRBD committee, works for only one contractor, and is responsible for all permits under the license. Applicants must be at least 18.3

  • New license applications go to a Licensing Committee, which meets on the second Thursday of each month, and to the Board of Review.34

    More

    Applicant names are published in a newspaper at least two weeks before the Board considers them. The whole process takes about 6 to 8 weeks.

  • PPRBD does not reciprocate licenses from other building departments.4

    More

    It accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2017, but no out-of-state exams.

For homeowners

Can I do the work and pull the permit myself?

A homeowner may get a permit only for work on the primary residence they own and live in, not for a rental or a home they do not live in, and it is illegal for a homeowner to pull a permit for a hired contractor.23

More

An owner who lives on the property may build one one- or two-family dwelling for personal use in any 12-month period and no more than five in a lifetime without a license. A single-member LLC or an asset-holding trust may be considered for a homeowner permit with supporting documents.

Check a contractor before you hire

Colorado Springs requires contractors to hold one of the local licenses above and insurance. Ask for a copy of each.

Colorado Springs contractor list Check a Colorado license

Good to know

  • A contractor not doing any permitted work may request a voluntary suspension for up to 12 months.14

    More

    Insurance is not required during the suspension, but the annual fees are still due.

  • A license is administratively revoked if it stays expired more than six months without a voluntary suspension, or if insurance lapses for more than 12 months.4

  • No one convicted of a felony, or found liable for fraud or theft, in work related to a PPRBD license or the building trades may hold a license or serve as an examinee.3

  • PPRBD also licenses wrecking, moving, sign, fire alarm and fire suppression contractors.5

    More

    Elevator (conveyance) contractors register using their state conveyance license.

  • A lost license or ID card can be replaced for $20.3

Common questions

Do I need a contractor license to work in Colorado Springs?

Yes. Colorado Springs has 10 license types (Building Contractor A (A-1 or A-2, General Commercial); Building Contractor B (B-1 or B-2, Limited Commercial); Building Contractor C (Home Builder); Building Contractor D-1 (Single Trade, including roofing and exteriors); Wrecking Contractor D-2A or D-3B; Building Contractor E (Maintenance and Remodeling); Building Contractor F (Solar Energy, F-1 Unlimited or F-2 Limited); Mechanical Contractor A, B, C or D; Electrical contractor registration; Plumbing contractor registration). You need the one that fits your work, plus any Colorado license your trade needs.

How much does a Colorado Springs contractor license cost?

It depends on the license type. Building Contractor A (A-1 or A-2, General Commercial): $50 (application fee (new license, nonrefundable)). Building Contractor B (B-1 or B-2, Limited Commercial): $50 (application fee (new license, nonrefundable)). Building Contractor C (Home Builder): $50 (application fee (new license, nonrefundable)). Building Contractor D-1 (Single Trade, including roofing and exteriors): $50 (application fee (new license, nonrefundable)). Wrecking Contractor D-2A or D-3B: $50 (application fee (new license, nonrefundable)). Building Contractor E (Maintenance and Remodeling): $50 (application fee (new license, nonrefundable)). Building Contractor F (Solar Energy, F-1 Unlimited or F-2 Limited): $50 (application fee (new license, nonrefundable)). Mechanical Contractor A, B, C or D: $50 (application fee (new license, nonrefundable)). Plumbing contractor registration: $100 (plumbing contractor or water connected appliance contractor, annual).

Can a homeowner pull a permit in Colorado Springs?

A homeowner may get a permit only for work on the primary residence they own and live in, not for a rental or a home they do not live in, and it is illegal for a homeowner to pull a permit for a hired contractor. An owner who lives on the property may build one one- or two-family dwelling for personal use in any 12-month period and no more than five in a lifetime without a license. A single-member LLC or an asset-holding trust may be considered for a homeowner permit with supporting documents.

How long is a Colorado Springs contractor license good for?

Licenses expire 12 months after issue and are renewed yearly by the examinee, online or with a notarized form. Renewal within 45 days after expiration has no penalty; later renewals carry penalties of half, one or two times the fee, and after 180 days the contractor must reapply and retest.

Sources

8 official pages, checked November 6, 2026
  1. About Us · Pikes Peak Regional Building Department · checked 2026-11-06
  2. The Homeowner Process · Pikes Peak Regional Building Department · checked 2026-11-06
  3. 2023 Pikes Peak Regional Building Code, 2nd Printing, Chapter 2 (Sections RBC201-RBC203) · Pikes Peak Regional Building Department · checked 2026-11-06
  4. Frequently Asked Questions of the Licensing Department · Pikes Peak Regional Building Department · checked 2026-11-06
  5. License Types · Pikes Peak Regional Building Department · checked 2026-11-06
  6. ICC Testing · Pikes Peak Regional Building Department · checked 2026-11-06
  7. Building Contractor License Application (last updated June 30, 2023) · Pikes Peak Regional Building Department · checked 2026-11-06
  8. Insurance Requirements for Contractors · Pikes Peak Regional Building Department · checked 2026-11-06

Rules change. Confirm with the agency before you bid or start work. How we research

Other places in Colorado