HVAC contractor · Georgia
Georgia HVAC contractor license requirements
What Georgia requires before you take paid heating, ventilation and air conditioning work: the license, job size limit, exams, fees, bond and insurance. Checked November 6, 2026 from 3 official sources.
Do I need a license to work as an HVAC contractor in Georgia?
Yes. You need a state license: Conditioned Air Contractor Class I or Conditioned Air Contractor Class II.
Issued by State Construction Industry Licensing Board, Division of Conditioned Air Contractors3
- Needed from
- See limit below
- Bond
- None listed
- Fee
- Not stated
- Exams
- 3
No dollar threshold. No person may do conditioned air contracting without a license from the Division of Conditioned Air Contractors.3
How to get licensed
- 1
Choose Class I (residential and light commercial) or Class II (unrestricted).3
- 2
Meet the experience requirement, get EPA Section 608 certification, and complete a board-approved heat loss and gain and duct design course.3
- 3
Apply to the Division of Conditioned Air Contractors with sworn experience affidavits and pay the fees set by the board.3
- 4
Pass the exam with a score of at least 70.3
What Georgia requires
Experience
Class I: two years of residential installation experience as a lead mechanic, one year as a service technician, and one year of residential supervisory experience.3
More
Class II: five years of full-time experience, made up of two years of commercial supervisory experience, one year as a service technician or service supervisor, and two years as a lead installation mechanic with at least one year on commercial systems over 175,000 BTU heating and 60,000 BTU cooling. Up to two years of credit is allowed for a technical college diploma in air conditioning technology or engineering, or one year for a vocational certificate. Experience must be attested by sworn affidavit.
Exams 3
- Conditioned Air Contractor exam (Class I or Class II)
Separate exams for Class I and Class II, approved by the division.3
More
The minimum passing score is 70. The act does not name the testing vendor.
- EPA Section 608 Technician Certification
Class I applicants need EPA Section 608 Type II certification. Class II applicants need Type II and Type III.3
- Heat loss and gain and duct design course
Applicants for either class must complete a board-approved heat loss and gain and duct design course.3
Bond None
No state license bond is listed in the act. A licensed conditioned air contractor may choose to deposit a $10,000 code compliance bond with the probate court in the county of their main place of business.3
More
A city or county may not then require a separate code compliance bond.
Liability insurance
Not published by the agency. Customers and general contractors often ask for proof anyway.
Workers' compensation
Not published by the agency for this license.
Renewal
All licenses issued under Chapter 14 are valid for two years and renew every two years.3
More
Renewal requires the renewal fee set by the board and completion of the continuing education the board requires. Late renewal is allowed for up to 31 days after expiration; after that the license lapses and must be reinstated. Reinstatement more than three years after expiration may require a new exam.
Good to know
Class I covers air conditioning and heat pump systems of 60,000 BTU cooling or less and gas heating systems of 175,000 BTU or less.3
More
Class II has no limits on project size or equipment type, except boilers, which are licensed by the Office of the Commissioner of Insurance and Safety Fire.
A subcontractor working for a licensed conditioned air contractor on duct, control or insulation work does not need this license. A subcontractor doing a complete system installation does.3
Conditioned air contracting includes the electrical circuit from the panel to the equipment when the building service is single-phase and not over 200 amperes.3
A person who is not licensed may not advertise that they are in this business unless the work is done by a licensed contractor.3
The chapter does not stop a person from doing this work in a home they own or live in, as long as the work meets codes and local inspection rules.3
More
Regular full-time employees working on their employer's premises are also exempt.
A state license lets the holder work anywhere in Georgia within its scope, and cities and counties may not add their own licensing requirements, except as the chapter allows.3
Applicants consent to a criminal background check, including fingerprints if required, and pay its cost.3
More
They must also submit a secure and verifiable identity document and an affidavit of lawful presence in the United States.
SB 553, signed in 2026, repealed and reenacted Chapter 14 of Title 43, which covers these licenses. The act does not state its own effective date.3
HVAC contractor rules in Georgia cities
Some places make HVAC contractors get a local license on top of Georgia's. Find yours below.
- AlbanyNo local license for this trade
- AlpharettaNo local license for this trade
- AthensNo local license for this trade
- AugustaLocal license required
- CartersvilleLocal license required
- DouglasvilleLocal license required
- DuluthNo local license for this trade
- HinesvilleNo local license for this trade
- LaGrangeLocal license required
- LawrencevilleLocal license required
- MaconLocal license required
- MariettaNo local license for this trade
- McDonoughLocal license required
- NewnanLocal license required
- Peachtree CityLocal license required
- PoolerLocal license required
- Richmond HillLocal license required
- RomeLocal license required
- SnellvilleLocal license required
- ThomasvilleLocal license required
- ValdostaLocal license required
- WoodstockLocal license required
No match. Your city may not be on the site yet. Check with its building department.
Hiring an HVAC contractor in Georgia?
What to ask for
A current Conditioned Air Contractor Class I or Conditioned Air Contractor Class II number, then look it up yourself.
Common questions
Do I need a license to work as an HVAC contractor in Georgia?
Yes. Georgia requires Conditioned Air Contractor Class I or Conditioned Air Contractor Class II. No dollar threshold. No person may do conditioned air contracting without a license from the Division of Conditioned Air Contractors.
Is a bond required?
No state license bond is listed in the act. A licensed conditioned air contractor may choose to deposit a $10,000 code compliance bond with the probate court in the county of their main place of business. A city or county may not then require a separate code compliance bond.
What exams do I need to pass?
Conditioned Air Contractor exam (Class I or Class II). EPA Section 608 Technician Certification. Heat loss and gain and duct design course.
How often do I renew?
All licenses issued under Chapter 14 are valid for two years and renew every two years. Renewal requires the renewal fee set by the board and completion of the continuing education the board requires. Late renewal is allowed for up to 31 days after expiration; after that the license lapses and must be reinstated. Reinstatement more than three years after expiration may require a new exam.
Sources
3 official pages, checked November 6, 2026
- Senate Bill 503 (2024), as passed: amends O.C.G.A. Chapter 41 of Title 43, residential and general contractors · Office of the Governor of Georgia (2024 signed legislation) · checked November 6, 2026
- House Bill 635 (2025), as passed House and Senate: amends O.C.G.A. Chapter 41 of Title 43 · Office of the Governor of Georgia (2025 signed legislation) · checked November 6, 2026
- Senate Bill 553 (2026), as passed: repeals and reenacts O.C.G.A. Chapter 14 of Title 43, electrical, plumbing, conditioned air, low voltage and utility contractors · Office of the Governor of Georgia (2026 signed legislation) · checked November 6, 2026
Rules change. Confirm with the agency before you bid or start work. How we research
Other trades in Georgia
General contractor
Commercial General Contractor license
Residential builder
Residential Contractor license, Residential-Basic or Residential-Light Commercial
Electrician
Electrical Contractor Class I or Electrical Contractor Class II
Plumber
Master Plumber Class I or Master Plumber Class II (Journeyman Plumber license for workers)
Handyman
Covered by the state contractor license above a threshold
Pest control
Structural Pest Control Company License, with a Designated Certified Operator for each category
HVAC contractor licenses in other states
Alabama
Certified Heating and Air Conditioning Contractor or Refrigeration Contractor
Arizona
R-39, C-39 or CR-39 Air Conditioning and Refrigeration
Arkansas
HVACR Class A, B, D or E license (HVACR Licensing Board)
California
C-20 Warm-Air Heating, Ventilating and Air-Conditioning Contractor
Connecticut
S-1 Unlimited Heating, Piping and Cooling Contractor (S-2 Journeyperson); limited types such as D-1/D-2 Warm Air, Air Conditioning and Refrigeration
Delaware
Master HVACR or Master HVACR Restricted License (Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners)
District of Columbia
Master Refrigeration and Air Conditioning Mechanic and Refrigeration and Air Conditioning Contractor (Board of Industrial Trades)
Florida
Certified Class A or Class B Air-Conditioning Contractor (CA) or Certified Mechanical Contractor (CM); registered versions RA and RM
Hawaii
C-52 Ventilating and Air Conditioning Contractor
Idaho
HVAC contractor and journeyman certificates of competency
Illinois
No state license. Cities or counties may license it
Indiana
No state license. Cities or counties may license it
Iowa
Mechanical contractor license, with Master and Journeyperson HVAC-refrigeration, hydronic, mechanical or sheet metal licenses for individuals
Kansas
No state license. Cities or counties may license it
Kentucky
Master HVAC Contractor license (Journeyman HVAC Mechanic license for workers)
Louisiana
Mechanical classification, or the Heat, Air Conditioning, Ventilation, Duct Work, and Refrigeration subclassification (LSLBC)
Maine
Oil Burner, Solid Fuel, or Propane and Natural Gas Technician (Maine Fuel Board)
Maryland
Master HVACR Contractor License (State Board of HVACR Contractors)
Massachusetts
Sheet Metal Worker license (journeyperson or master) for ductwork; Refrigeration Technician license for refrigeration over 10 tons
Michigan
Mechanical Contractor License (HVAC equipment and other work classifications)
Minnesota
Mechanical contractor bond filing (no state HVAC license)
Mississippi
Heat, Ventilation, A/C (HVAC) specialty or Mechanical major classification (commercial); Residential HVAC or Residential Mechanical license
Nebraska
No state license. Cities or counties may license it
Nevada
C-21 Refrigeration and Air-Conditioning (C-21b Air-Conditioning); C-1f for heating and evaporative cooling
New Hampshire
Fuel Gas Installation Technician or Fuel Gas Service Technician license (gas equipment)
New Jersey
Master HVACR Contractor License
New Mexico
MM-3 Heating, Ventilation and Air Conditioning (or MM-98 Mechanical)
North Carolina
Heating Contractor license (Heating Group 1, 2 or 3; Class I or Class II)
Ohio
HVAC Contractor (OCILB)
Oklahoma
Mechanical Contractor License (HVAC/R Unlimited or Limited)
Oregon
CCB contractor license; electrical HVAC work also needs a BCD Restricted Energy Contractor (CRE) or Limited Maintenance Specialty Contractor HVAC/R (LHR) license
Pennsylvania
Home Improvement Contractor Registration (HICPA)
Rhode Island
Refrigeration/Air Conditioning Master and Journeyperson; Pipefitter Master and Journeyperson; Sheet Metal Contractor and Journeyperson
South Carolina
Residential HVAC Installer and Repairer license (Residential Builders Commission); Mechanical Contractor license, Air Conditioning, Heating or Packaged Equipment classification (Contractor's Licensing Board)
Tennessee
Contractor license with CMC-C HVAC, Refrigeration and Gas Piping classification
Texas
Air Conditioning and Refrigeration Contractor License (Class A or Class B)
Utah
H100 HVAC Contractor
Virginia
Class A, B or C contractor license with the HVAC (HVA) classification, qualified by a Master HVAC tradesman license
Washington
Specialty contractor registration (Heating, ventilation, air-conditioning and refrigeration (HVAC/R), code SM)
West Virginia
HVAC Technician, HVAC Residential Technician or Technician-in-Training license (Division of Labor); Heating, Ventilating and Cooling Contractor license (Contractor Licensing Board)
Wisconsin
HVAC Contractor registration (business); HVAC Qualifier certification (optional, individual)