Plumber · Minneapolis, MN
Plumber license requirements in Minneapolis, Minnesota
Everything a plumber needs to work legally in Minneapolis: the Minnesota state rule and the local licenses. Checked November 6, 2026 from 11 official sources.
What does a plumber need to work in Minneapolis?
You need two licenses: one from Minnesota and one from Minneapolis.
Minneapolis has 3 license types that cover this trade. You need only the one that fits your work. Each is described below.
Minnesota state license · required
Plumbing contractor license or restricted plumbing contractor license (company), with personal master or journeyworker plumber licenses
Minneapolis license · required · pick one
- Minneapolis fee
- $30
- Minneapolis bond
- $25,000
- Minnesota bond
- $25,000
- Insurance
- Proof required
Steps to work as a plumber in Minneapolis
- 1
Get the Minnesota Plumbing contractor license or restricted plumbing contractor license (company), with personal master or journeyworker plumber licenses
A plumbing contractor license is required for plumbing work in Minnesota communities with more than 5,000 people.5
More
In smaller communities, the work may be done by employees of a licensed restricted plumbing contractor, but restricted contractors cannot work in communities over 5,000.
- 2
- 3
Get a certificate of insurance
The minimums depend on which license you get. They are listed in each license below.
- 4
Apply for your Minneapolis license
Apply for the one that fits your work.
- Gas Fitter licenseNot published
- Plumber licenseNot published
- Competency Card (masters and journeymen) · card fee, per trade4$30
- 5
Pull a permit for each job
Homeowners and contractors can apply for construction permits.11
More
A contractor applying for a building permit must show a city residential specialty contractor license or a state residential building contractor, residential remodeler or residential roofer license.
The 3 Minneapolis license types (you need one)
Gas Fitter license HVAC contractorPlumber Fee— Bond$25,000
What you need
A Minneapolis Master Competency Card.2
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.2
Renewal
Trade licenses expire December 1.2
Plumber license Plumber Fee— Bond$25,000
Who needs it
What you need
A Minneapolis Master Competency Card.2
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.2
Renewal
Trade licenses expire December 1.2
Competency Card (masters and journeymen) PlumberHVAC contractor Fee$30 Bond—
Who needs it
Masters and journeymen in fuel gas fitting, plumbing (gas specific), refrigeration, warm air and ventilation, and steam and hot water need a card to work in Minneapolis.4
What you need
At least four years of work experience before applying, and a city exam after the Building Official approves eligibility.4
More
Mechanical trades also need at least 576 hours of trade-related education. Plumbing/gas specific applicants need a state plumbing license at the same level and at least 1,600 hours of fuel gas experience or training.
Test scores are valid for one year. After a failed exam there is a 60-day wait before retesting.4
Holders of a City of Saint Paul Certificate of Competency can get a Minneapolis card by sending a copy of the St. Paul card and the fee.4
Fees and bond
Minnesota rules in short
State license
Plumbing contractor license or restricted plumbing contractor license (company), with personal master or journeyworker plumber licenses. Full Minnesota requirements
Job size limit
A plumbing contractor license is required for plumbing work in Minnesota communities with more than 5,000 people.5
More
In smaller communities, the work may be done by employees of a licensed restricted plumbing contractor, but restricted contractors cannot work in communities over 5,000.
State liability insurance
Hiring a plumber in Minneapolis?
What to ask for
A current Minnesota Plumbing contractor license or restricted plumbing contractor license (company), with personal master or journeyworker plumber licenses, the Minneapolis Gas Fitter license or plumber license or Competency Card (masters and journeymen), and a certificate of insurance.
Doing the work yourself
A person who owns and lives in a unit of a 1- to 4-unit dwelling can get a permit to do their own construction work, with a valid photo ID.11
More
An owner who lives in a single-family home can do their own plumbing or mechanical work but may not work on gas-fired heating equipment. Corporations, LLCs and partnerships cannot get owner permits. An owner who builds or improves more than one property in 24 months needs a state residential building contractor or remodeler license.
Sources
11 official pages, checked November 6, 2026
- Gas fitter license · City of Minneapolis · checked 2026-11-06
- License Application: Trades (last updated 7/30/26) · City of Minneapolis Licenses and Consumer Services · checked 2026-11-06
- Plumbing license · City of Minneapolis · checked 2026-11-06
- Competency cards · City of Minneapolis · checked 2026-11-06
- Plumbing contractor licensing basics · Minnesota Department of Labor and Industry · checked 2026-11-06
- Plumbing license basics · Minnesota Department of Labor and Industry · checked 2026-11-06
- Plumbing license experience requirements · Minnesota Department of Labor and Industry · checked 2026-11-06
- Sec. 326B.46 MN Statutes · Minnesota Office of the Revisor of Statutes · checked 2026-11-06
- Continuing education requirements for plumbers · Minnesota Department of Labor and Industry · checked 2026-11-06
- Plumbing license types and credentials · Minnesota Department of Labor and Industry · checked 2026-11-06
- Construction permit applicants · City of Minneapolis · checked 2026-11-06
Rules change. Confirm with the agency before you bid or start work. How we research