Seattle, WA · Local contractor rules
Contractor license requirements in Seattle, Washington
What Seattle requires before you work there, on top of Washington state licensing. Checked November 6, 2026 from 8 official sources.
Do I need a Seattle license to work there?
Only for some trades: Plumber and HVAC contractor.
SDCI issues three kinds of trade licenses: refrigeration, gas piping, and steam engineer and boiler operator.1
Seattle has 2 license types. You need only the one that fits your work:
Refrigeration contractor license (Class A, B or C) For: HVAC contractor Fee$312.75BondNot listed Gas piping mechanic license For: Plumber, HVAC contractor Fee$139BondNot listedThis is on top of the Washington state license, if your trade has one. Check your trade
Pick your trade
Find your work below. Each row shows whether you need a Washington state license and which Seattle license is yours. Open a row for the full checklist.
How to start working in Seattle
- 1
Get your Washington license if your trade needs one
Washington licenses some trades and not others. The trade list above shows the state rule for yours.
- 2
Apply for your Seattle license
Apply for the one that fits your work, with Seattle Department of Construction and Inspections (SDCI), Trade Licensing.
- Refrigeration contractor license (Class A, B or C)$312.75
- Gas piping mechanic license$139
- 3
Business license or tax registration
Anyone doing business in Seattle needs a Seattle business license tax certificate.2
More
Contractors based outside the city need one for work done in the city, and each subcontractor needs its own. Businesses with no place of business in Seattle and $4,000 or less a year of Seattle gross income are exempt. The 2026 fee is set by the prior year's taxable revenue: $73 under $20,000, $147 from $20,000 to $499,999.99, $667 from $500,000 to $1,999,999.99, $1,604 from $2 million to $5 million, and $3,210 over $5 million. New businesses pay the lowest-tier fee the first year, or half of it if they start on or after July 1. Certificates expire December 31 and are renewed each year through FileLocal or by mail.
- 4
Pull a permit for each job
Homeowners may apply for construction permits, and a contractor can be assigned to a homeowner's permit.38
More
Any professional applying for an electrical permit must hold a Washington State electrical contractor license and a Seattle business license. All applications go through the Seattle Services Portal.
- 5
Renew on time
All licenses expire June 30 each year and are renewed annually.
More
A license can be renewed up to one year after it expires; after that the exam must be retaken. If the journeyman attached to a contractor license does not renew on time, both licenses expire. A license issued with less than six months left costs half the annual fee.
Details for each Seattle license type
You need only one of these: the one that fits your work.
Refrigeration contractor license (Class A, B or C) HVAC contractor Fee$312.75 Bond—
Who needs it
Required for anyone who installs, repairs, services, alters or moves self-contained or unit refrigeration systems as defined by the Seattle Mechanical Code.45
More
A City of Seattle refrigeration contractor license is needed to get a Seattle refrigeration permit. It is not needed to work on an established system in a building whose owner or operator employs a licensed industrial refrigeration engineer.
What you need
Class A covers machines using only sulphur dioxide, methyl chloride and freons.4
More
Class B covers machines using all other refrigerants. Class C covers both.
The business must have an employee with a journeyman refrigeration mechanic license designated to do the work.45
More
A corporation, partnership or owner who does not do the work must name an officer or employee who takes the qualifying exam, and must tell the city within 30 days if that person leaves. The license is suspended until a new qualified person is named.
The journeyman exam is online and needs a score of at least 70 percent.45
More
Candidates need three years of full-time experience as a journeyman refrigeration mechanic or equivalent, or two years at a recognized technical school plus two years of trade experience, or graduation from a recognized technical school plus one year of trade experience.
Fees and bond
Renewal
All licenses expire June 30 each year and are renewed annually.456
More
A license can be renewed up to one year after it expires; after that the exam must be retaken. If the journeyman attached to a contractor license does not renew on time, both licenses expire. A license issued with less than six months left costs half the annual fee.
Gas piping mechanic license PlumberHVAC contractor Fee$139 Bond—
Who needs it
What you need
Applicants file an affidavit showing at least 12 months of full-time experience as, or supervised by, a gas piping mechanic; or 6 months of that experience plus a certificate from a board-approved gas piping class; or a valid plumber's license.7
The exam is online, open book and multiple choice, and needs a score of 70 percent.7
More
Applicants must bring their own printed International Fuel Gas Code with Seattle amendments. The license must be bought within 90 days of passing.
Renewal
Renew online every year through the Seattle Services Portal.7
More
A license can be renewed up to one year after it expires; after that the exam must be retaken.
Anyone doing business in Seattle, including contractors based outside the city and each subcontractor, needs a Seattle business license tax certificate.2
Electrical contractors applying for Seattle electrical permits need a Washington State electrical contractor license and a Seattle business license.3
For homeowners
Can I do the work and pull the permit myself?
Property owners may do their own electrical work when they own and occupy the property.3
More
A homeowner who does not do the work must hire an electrical contractor.
Check a contractor before you hire
Seattle requires contractors to hold one of the local licenses above. Ask for a copy of each.
Good to know
Common questions
Do I need a contractor license to work in Seattle?
Only for some trades: plumber and HVAC contractor. Other trades need no Seattle license, only any Washington license the trade requires.
How much does a Seattle contractor license cost?
It depends on the license type. Refrigeration contractor license (Class A, B or C): $312.75 (refrigeration contractor license, class a (annual, 2026)). Gas piping mechanic license: $139 (gas piping mechanic license (annual, 2026)).
Can a homeowner pull a permit in Seattle?
Property owners may do their own electrical work when they own and occupy the property. A homeowner who does not do the work must hire an electrical contractor.
How long is a Seattle contractor license good for?
All licenses expire June 30 each year and are renewed annually. A license can be renewed up to one year after it expires; after that the exam must be retaken. If the journeyman attached to a contractor license does not renew on time, both licenses expire. A license issued with less than six months left costs half the annual fee.
Sources
8 official pages, checked November 6, 2026
- Trade Licensing · Seattle Department of Construction and Inspections · checked 2026-11-06
- Business Licenses · City of Seattle, City Finance · checked 2026-11-06
- Electrical Permit · Seattle Department of Construction and Inspections · checked 2026-11-06
- City of Seattle Refrigeration Licensing Law, Seattle Municipal Code 6.410 · Seattle Department of Construction and Inspections · checked 2026-11-06
- Refrigeration Licensing · Seattle Department of Construction and Inspections · checked 2026-11-06
- 2026 Fee Subtitle · Seattle Department of Construction and Inspections · checked 2026-11-06
- Gas Pipe Licensing · Seattle Department of Construction and Inspections · checked 2026-11-06
- Construction Permits & Inspections Frequently Asked Questions · Seattle Department of Construction and Inspections · checked 2026-11-06
Rules change. Confirm with the agency before you bid or start work. How we research