Oak Ridge, TN · Local contractor rules
Contractor license requirements in Oak Ridge, Tennessee
What Oak Ridge requires before you work there, on top of Tennessee state licensing. Checked November 10, 2026 from 3 official sources.
Do I need an Oak Ridge license to work there?
Yes. You need one Oak Ridge license. Which one depends on the work you do.
Oak Ridge licenses electrical, plumbing and mechanical contractors under Title 12 of the city code.2
More
A city Trade Licensing Board sets the standards, exams and licensing for these trades.
Oak Ridge has 4 license types. You need only the one that fits your work:
Building contractor registration For: General contractor, residential builder FeeNot publishedBondNot listed City electrical contractor license and electrician certificates For: Electrician FeeNot publishedBondNot listed City master and journeyperson plumber license For: Plumber Fee$50BondNot listed City mechanical contractor license For: HVAC contractor FeeNot publishedBondNot listedThis is on top of the Tennessee state license, if your trade has one. Check your trade
Pick your trade
Find your work below. Each row shows whether you need a Tennessee state license and which Oak Ridge license is yours. Open a row for the full checklist.
How to start working in Oak Ridge
- 1
Get your Tennessee license if your trade needs one
Tennessee licenses some trades and not others. The trade list above shows the state rule for yours.
- 2
Get a certificate of insurance
The minimums depend on which license you get. They are listed in each license below.
- 3
Apply for your Oak Ridge license
Apply for the one that fits your work, with City of Oak Ridge Codes Enforcement (Planning and Development).
- Building contractor registrationNot published
- City electrical contractor license and electrician certificatesNot published
- City master and journeyperson plumber license$50
- City mechanical contractor licenseNot published
- 4
Business license or tax registration
State law requires all businesses operating in Oak Ridge to have a business license.23
More
General contractors and subcontractors are in Class IV, which runs October 1 to September 30. The application goes to the City of Oak Ridge Utility Business Office with $15. Class I and II electrical and mechanical contractor licenses also require a current city business license.
- 5
Pull a permit for each job
Building-related permits are applied for through the city's CityView Portal.12
More
Electrical work permits are issued only to Class I, II and IV electrical contractors and to homeowners doing their own work. Plumbing permits are issued only to licensed master plumbers and homeowners doing their own work. Mechanical permits are issued only to Class I and II mechanical contractors and homeowners doing their own work.
- 6
Renew on time
Licenses and certificates run for 12 months from July 1 to June 30.
More
If not renewed within 1 year after expiring, the full application and exam must be repeated. Fees are set by the city manager.
Details for each Oak Ridge license type
You need only one of these: the one that fits your work.
Building contractor registration General contractorResidential builder Fee— Bond—
Who needs it
Every contractor or builder who makes contracts to build or repair buildings that need a city permit, including contractors who sublet any part of the work.2
What you need
Pay the privilege license tax set by ordinance and register your full name, residence and place of business in the register kept by the code enforcement administrator.2
More
Update the register if you move within the city (building code amendment, Section 105.8, in city code §12-202).
Any contractor doing work that needs a city building permit must show evidence of liability insurance in an amount acceptable to the city manager, and evidence of workers' compensation insurance under state rules.2
Insurance
Liability insurance in an amount acceptable to the city manager, and workers' compensation insurance as state rules require.2
City electrical contractor license and electrician certificates Electrician Fee— Bond—
Who needs it
Anyone in the business of installing, altering or repairing electric wiring, devices, equipment or appliances in the city needs a Class I Electrical Contractor, Class II Residential Electrical Contractor or Class IV Appliance Electrical Contractor license.2
More
A firm must employ a qualified person holding one of these licenses. Employees doing electrical maintenance at their own workplace need a Class III Maintenance Electrician license. The city also issues Master Electrician and Journeyperson Electrician certificates.
What you need
Class I (any electrical work): a regular place of business, a current city business license, at least 5 years of full-time electrical experience, a passing written exam score, and 3 favorable work references covering 5 years.2
Class II (residential dwellings up to 3 stories): a regular place of business, a current city business license, at least 4 years of full-time electrical experience, a passing exam score, and 3 favorable references covering 4 years.2
Class III Maintenance Electrician: at least 2 years of experience with the equipment at the place of employment and a passing exam score.2
More
Class IV Appliance Electrical Contractor: at least 2 years of appliance experience, a passing exam score and 3 references covering 2 years.
Master Electrician certificate: 5 years of experience; Journeyperson Electrician certificate: 4 years of experience. Both need a passing exam score and 3 favorable references.2
The board holds a public hearing, announced in a newspaper at least 10 days ahead, before issuing a Class I, II or IV license or a Master or Journeyperson certificate.2
More
The license must be obtained within 30 days after meeting all requirements.
The city manager also issues the license to anyone holding a current State of Tennessee Electrical Contractor license issued after May 11, 1992.2
More
A license from another city's board with equal or higher standards may be accepted without an exam (reciprocity).
Exams use board-approved testing agencies, including the State of Tennessee licensing board's approved test.2
More
The test grade must be no more than 2 years old when the applicant appears before the board.
Insurance
Class I, II and IV electrical contractors must show liability insurance in an amount acceptable to the city manager and workers' compensation insurance under state rules.2
Renewal
Licenses and certificates run for 12 months from July 1 to June 30.2
More
If not renewed within 1 year after expiring, the full application and exam must be repeated. Fees are set by the city manager.
City master and journeyperson plumber license Plumber Fee$50 Bond—
Who needs it
Anyone in the business of installing, altering or repairing plumbing in the city needs a master plumber's or journeyperson plumber's license.2
More
A plumbing firm must employ a master plumber to supervise the work. Maintenance workers doing plumbing at their own workplace also need a master or journeyperson license.
What you need
Master plumber: a regular place of business, at least 5 years of full-time plumbing experience, a passed written exam, and at least 3 favorable work references chosen at random by the board. The board holds a public hearing before granting a master's license.2
Journeyperson plumber: at least 3 years of full-time plumbing experience, a passed written exam, and favorable references from employers. A journeyperson may work only for a licensed master plumber.2
A license from another city's plumbing board with equal or higher standards may be accepted without an exam (reciprocity).2
Fees and bond
Renewal
Plumbing licenses expire on December 31 of the year issued and may be renewed by paying the fee.2
More
If not renewed within 1 year after expiring, the exam must be taken again.
City mechanical contractor license HVAC contractor Fee— Bond—
Who needs it
Anyone in the business of installing, altering or repairing mechanical systems in the city (ventilating, heating, cooling, air conditioning, refrigeration, incinerators and other energy-related systems) needs a Class I Mechanical Contractor or Class II Residential Mechanical Contractor license. A firm must employ a qualified person holding one of these licenses.2
What you need
Class I: a regular place of business, a current city business license, at least 5 years of full-time mechanical experience, a passing written exam score, and 3 favorable references covering 5 years.2
Class II (residential buildings of up to 4 units): a regular place of business, a current city business license, at least 4 years of full-time mechanical experience, a passing exam score, and 3 favorable references covering 4 years.2
The Trade Licensing Board holds a public hearing before issuing the license.2
More
The city manager also issues the license to anyone holding a current State of Tennessee mechanical contractor license.
Insurance
Mechanical contractors must show liability insurance in an amount acceptable to the city manager and workers' compensation insurance under state rules.2
Renewal
Mechanical licenses are issued yearly and expire March 31. If not renewed within 1 year after expiring, the full application and exam must be repeated. Fees are set by the city manager.2
Since December 20, 2024, Codes Enforcement issues building trade permits to applicants who hold a valid City of Oak Ridge or State of Tennessee license for the work.1
A person with a State of Tennessee license for one of these trades may work in the city without a city exam, after showing the city proof of the state license and insurance. The city then treats that person as holding a local license.2
Every contractor or builder who contracts for building work that needs a city permit must pay the city privilege license tax and register with the code enforcement administrator.2
For homeowners
Can I do the work and pull the permit myself?
A bona fide owner who lives in (or will live in) a single-family dwelling, buys all materials and does all the labor personally does not need a city electrical, plumbing or mechanical license, but still needs a permit (except for minor repairs) and must pay the fees.2
Check a contractor before you hire
Oak Ridge requires contractors to hold one of the local licenses above and insurance. Ask for a copy of each.
Good to know
The electrical and mechanical license sections say the applicant must keep current the bond and insurance specified in city code §12-310, but §12-310 as published covers exams and names no bond amount.2
Common questions
Do I need a contractor license to work in Oak Ridge?
Yes. Oak Ridge has 4 license types (Building contractor registration; City electrical contractor license and electrician certificates; City master and journeyperson plumber license; City mechanical contractor license). You need the one that fits your work, plus any Tennessee license your trade needs.
How much does a Oak Ridge contractor license cost?
It depends on the license type. City master and journeyperson plumber license: $50 (license by reciprocity, master plumber).
Can a homeowner pull a permit in Oak Ridge?
A bona fide owner who lives in (or will live in) a single-family dwelling, buys all materials and does all the labor personally does not need a city electrical, plumbing or mechanical license, but still needs a permit (except for minor repairs) and must pay the fees.
How long is a Oak Ridge contractor license good for?
Licenses and certificates run for 12 months from July 1 to June 30. If not renewed within 1 year after expiring, the full application and exam must be repeated. Fees are set by the city manager.
Sources
3 official pages, checked November 10, 2026
- Codes Enforcement · City of Oak Ridge · checked 2026-11-10
- Oak Ridge City Code, Title 12 - Building, Utility, Etc. Codes · City of Oak Ridge · checked 2026-11-10
- Business Licenses & Permits · City of Oak Ridge · checked 2026-11-10
Rules change. Confirm with the agency before you bid or start work. How we research