licenserules

Newton, KS · Local contractor rules

Contractor license requirements in Newton, Kansas

What Newton requires before you work there, on top of Kansas state licensing. Checked November 10, 2026 from 5 official sources.

Do I need a Newton license to work there?

Yes. You need one Newton license. Which one depends on the work you do.

Everyone offering to do business as a building, electrical, mechanical or plumbing contractor in Newton must get a city contractor's license.2

This is on top of the Kansas state license, if your trade has one. Check your trade

Pick your trade

Find your work below. Each row shows whether you need a Kansas state license and which Newton license is yours. Open a row for the full checklist.

How to start working in Newton

  1. 1

    Get your Kansas license if your trade needs one

    Kansas licenses some trades and not others. The trade list above shows the state rule for yours.

  2. 2

    Get a surety bond

    • Building contractor license (Class A, B, C, D)$5,000

    You pay a yearly premium to a surety company, not the full bond amount. Estimate the cost

  3. 3

    Get a certificate of insurance

    The minimums depend on which license you get. They are listed in each license below.

  4. 4

    Apply for your Newton license

    Apply for the one that fits your work, with City of Newton Building, Zoning & Planning (Public Works / Engineering).

    • Building contractor license (Class A, B, C, D)$200
    • Wrecking contractor license$30
    • Electrical, mechanical or plumbing contractor license (trades)$150

    What each license needs

  5. 5

    Pull a permit for each job

    Permits and inspections are required for construction valued over $1,000 (or $500 in materials for do-it-yourself projects) and for all new electrical, mechanical or plumbing work.25

    More

    Permits can be applied for online through the city's iWorQ portal, by email, or in person at City Hall. Building permit fees are based on project valuation, starting at $22.43 for $1 to $500.

    Open the Newton permit portal

  6. 6

    Renew on time

    Fees are charged per year.

Details for each Newton license type

You need only one of these: the one that fits your work.

Building contractor license (Class A, B, C, D) General contractorResidential builder Fee$200 Bond$5,000

Who needs it

Builders. Class A covers all commercial and residential construction.12

More

Class B covers residential and commercial construction up to three stories. Class C covers residential construction up to two stories and three units, plus non-structural commercial remodeling. Class D covers repair and remodeling of one- to four-family residences only.

What you need

  • Proof of national testing certification (ICBO/ICC, Block, Experior or Prometric), or passing the City of Newton building code test.12

    More

    The Class A and B tests have a 4-hour limit and the Class C test a 2-hour limit; they are based on the International Building and/or Residential Codes and the City of Newton Building Code.

  • The application asks for the applicant's experience over the last five years.3

Fees and bond

Class A license (per year)13$200
Class B license (per year)13$150
Class C license (per year)13$125
Class D license (per year)13$125
City exam, Class A, B or C3$30
City exam, Class D3$5
Bond1$5,000

No bond is listed for these licenses in general. A Class D license held strictly for working on one's own property may keep a $5,000 bond instead of insurance.

Insurance

General liability and workers' compensation of $500,000 for Class A and B, and $300,000 for Class C and D, with the City of Newton as certificate holder.12

More

If workers' compensation is not needed, a signed, notarized waiver is required.

Renewal

Fees are charged per year.1

Apply on the official site
Wrecking contractor license Demolition contractor Fee$30 Bond—

Who needs it

Contractors demolishing buildings. The license allows demolition of all types of buildings.2

Fees and bond

Wrecking contractor license (per year)2$30

Insurance

Proof of $300,000 of liability and workers' compensation insurance.2

Renewal

Fee is charged per year.2

Apply on the official site
Electrical, mechanical or plumbing contractor license (trades) ElectricianHVAC contractorPlumber Fee$150 Bond—

Who needs it

All businesses offering to do electrical, mechanical or plumbing installations in Newton.24

More

Electricians, mechanical technicians and plumbers must hold a master or journeyman certification from a state-approved testing agency, and the city also issues master and journeyman certificates.

What you need

  • A copy of a master-level Block, Experior, Prometric or ICC certificate. Other city or county licenses are not accepted.1

  • Certificates for 12 hours of continuing education within the last 2 years, for both master and journeyman licenses.1

    More

    A CEU log is accepted only if it has a certified stamp or embossed seal.

  • The application asks for verified work experience in the field.4

Fees and bond

Trades contractor license (per year)12$150
Master license (per year)12$40
Journeyman license (per year)12$20

Insurance

General liability and workers' compensation with the City of Newton as certificate holder.12

More

The license page says a minimum of $500,000; the Building & Zoning FAQ says $300,000. If workers' compensation is not needed, a signed, notarized waiver is required.

Renewal

Annual. Master and journeyman holders show 12 hours of approved continuing education.2

Apply on the official site
  • Builders get a Class A, B, C, D or Wrecking license depending on the work.12

    More

    Electrical, mechanical and plumbing contractors get a trades contractor license.

  • Newton does not accept other city or county licenses. Applicants must send a copy of the actual testing certificate (ICC/ICBO, Block, Experior or Prometric).1

  • Applications can be filed online through the city's iWorQ contractor portal, by email to contractor@newtonkansas.com, or in person at City Hall, 201 E. 6th St. The city posts a PDF list of licensed contractors on its license page.1

For homeowners

Can I do the work and pull the permit myself?

Owner-occupants may work on their own house without a contractor's license.2

More

If they hire out electrical, mechanical or plumbing work, that person must be a licensed contractor. Any other residential or commercial project, whether or not you own the property, must have a licensed contractor do the work.

Check a contractor before you hire

Newton requires contractors to hold one of the local licenses above and a bond and insurance. Ask for a copy of each.

Check a Kansas license

Good to know

  • The FAQ also lists a gas fitter contractor license: $150 the first year and $150 each renewal, plus a $40 master fee a year with master-level testing and 12 hours of approved continuing education.2

  • The license page and FAQ give different insurance minimums for trades contractors ($500,000 vs. $300,000).12

Common questions

Do I need a contractor license to work in Newton?

Yes. Newton has 3 license types (Building contractor license (Class A, B, C, D); Wrecking contractor license; Electrical, mechanical or plumbing contractor license (trades)). You need the one that fits your work, plus any Kansas license your trade needs.

How much does a Newton contractor license cost?

It depends on the license type. Building contractor license (Class A, B, C, D): $200 (class a license (per year)). Wrecking contractor license: $30 (wrecking contractor license (per year)). Electrical, mechanical or plumbing contractor license (trades): $150 (trades contractor license (per year)).

Do Newton contractors need a bond?

Yes, and the amount depends on the license type. Building contractor license (Class A, B, C, D): $5,000 bond.

Can a homeowner pull a permit in Newton?

Owner-occupants may work on their own house without a contractor's license. If they hire out electrical, mechanical or plumbing work, that person must be a licensed contractor. Any other residential or commercial project, whether or not you own the property, must have a licensed contractor do the work.

How long is a Newton contractor license good for?

Fees are charged per year.

Sources

5 official pages, checked November 10, 2026
  1. Apply for a Contractor's License · City of Newton · checked 2026-11-10
  2. Building & Zoning FAQ · City of Newton · checked 2026-11-10
  3. Application for License, Contractor, Building Construction (PDF) · City of Newton · checked 2026-11-10
  4. Application for City of Newton, Kansas Certification / License (Electrical, Mechanical, or Plumbing) (PDF) · City of Newton · checked 2026-11-10
  5. Apply for a Permit · City of Newton · checked 2026-11-10

Rules change. Confirm with the agency before you bid or start work. How we research

Other places in Kansas