licenserules

Russell, KS · Local contractor rules

Contractor license requirements in Russell, Kansas

What Russell requires before you work there, on top of Kansas state licensing. Checked November 10, 2026 from 3 official sources.

Do I need a Russell license to work there?

Yes. You need one Russell license. Which one depends on the work you do.

Russell requires a city license for electrical, plumbing, mechanical and general contract work.13

More

Licenses are applied for through the City Clerk and considered by the City Council.

This is on top of the Kansas state license, if your trade has one. Check your trade

Pick your trade

Find your work below. Each row shows whether you need a Kansas state license and which Russell license is yours. Open a row for the full checklist.

How to start working in Russell

  1. 1

    Get your Kansas license if your trade needs one

    Kansas licenses some trades and not others. The trade list above shows the state rule for yours.

  2. 2

    Get a certificate of insurance

    The minimums depend on which license you get. They are listed in each license below.

  3. 3

    Apply for your Russell license

    Apply for the one that fits your work, with City of Russell Building, Planning & Zoning Department.

    • General and building contractor license$400
    • Plumbing or gas fitter, mechanical (HVAC) and electrical contractor license$300
    • Roofing contractor license$200
    • Limited contractor license$200

    What each license needs

  4. 4

    Pull a permit for each job

    A license may not be transferred, and a licensee may not let anyone else take out permits in the licensee's name.13

    More

    Payments for licenses may be made by card by phone or mailed to the Building, Planning & Zoning Department.

  5. 5

    Renew on time

    Two-year licenses run from January 1 of an odd-numbered year to December 31 of the next even-numbered year.

    More

    Late renewals pay the new-license fee and must show 12 hours of continuing education.

Details for each Russell license type

You need only one of these: the one that fits your work.

General and building contractor license General contractorResidential builder Fee$400 Bond—

Who needs it

General contractor: unlimited scope. Building contractor: commercial buildings and single- or multi-family dwellings up to three stories, and remodeling of all structures.3

What you need

  • General: a college degree in architecture, construction science or engineering, two years of job experience, and a score of at least 75% on the ICC standard exam.3

  • Building: a construction science degree, or a two-year trade program certificate plus three years of documented field experience, or five years of documented experience, or at least 75% on the ICC standard exam.3

  • Twelve classroom hours of city-approved continuing education in the two years before renewal.3

Fees and bond

General contractor, initial or non-consecutive renewal13$400
General contractor, consecutive renewal3$300
Building contractor, initial or non-consecutive renewal13$300
Building contractor, consecutive renewal3$200

Insurance

Public liability insurance of at least $1,000,000 per occurrence and $1,000,000 aggregate, with the City of Russell listed as certificate holder.13

Renewal

Two-year licenses run from January 1 of an odd-numbered year to December 31 of the next even-numbered year.13

More

Late renewals pay the new-license fee and must show 12 hours of continuing education.

Apply on the official site
Plumbing or gas fitter, mechanical (HVAC) and electrical contractor license PlumberHVAC contractorElectrician Fee$300 Bond—

Who needs it

Contractors doing plumbing or gas fitting, HVAC mechanical, or electrical work in the city.3

What you need

  • Proof of a master or journeyman certification in the trade, a two-year trade program certificate, at least 75% on an ICC, IAPMO or Prometric standard exam, or at least three years of field experience certified in writing by a master in the trade.3

  • Twelve classroom hours of city-approved continuing education in the two years before renewal.3

  • Helpers and apprentices are listed on the contractor's license at no extra fee and must work under immediate supervision of a licensee.3

Fees and bond

Each trade, initial or non-consecutive renewal13$300
Each trade, consecutive renewal3$200

Insurance

Public liability insurance of at least $1,000,000 per occurrence and $1,000,000 aggregate.13

Renewal

Two-year licenses ending December 31 of even-numbered years.3

Apply on the official site
Roofing contractor license Roofer Fee$200 Bond—

Who needs it

Contractors installing, repairing and replacing residential and commercial roof coverings.3

What you need

  • Kansas roofing registration number and a copy of the certificate issued by the Attorney General's Office.3

Fees and bond

Initial or non-consecutive renewal13$200
Consecutive renewal3$100

Insurance

Public liability insurance of at least $1,000,000 per occurrence and $1,000,000 aggregate.3

Renewal

Two-year licenses ending December 31 of even-numbered years.3

Apply on the official site
Limited contractor license Concrete contractorFence contractorDemolition contractorPool and spa contractorLandscaper Fee$200 Bond—

Who needs it

Contractors doing only one type of work: concrete, fencing/decks, sheetrock, masonry, lawn sprinkler/irrigation, doors/windows/guttering/siding, demolition, excavation, security/fire alarm systems, sign installation, or swimming pool installation and repair.13

What you need

  • Two years of documented field experience in the type of work, certified in writing by the applicant. Limited contractors are exempt from the continuing education rule.3

Fees and bond

Initial or non-consecutive renewal (each type)13$200
Consecutive renewal3$100

Insurance

Public liability insurance of at least $1,000,000 per occurrence and $1,000,000 aggregate.3

Renewal

Two-year licenses ending December 31 of even-numbered years.3

Apply on the official site
  • License types are general, building, plumbing or gas fitter, mechanical (HVAC), electrical and roofing contractor, plus limited contractor licenses for specific kinds of work.3

  • Commercial and all rental properties must use a licensed contractor for any work that needs an electrical, plumbing or mechanical permit.3

For homeowners

Can I do the work and pull the permit myself?

The owner of a single-family home used only as the owner's residence, including usual accessory buildings, is exempt from contractor licensing and may get a building permit if the owner buys and installs all materials and the work passes city inspection.3

More

Contractor-type work worth $250 or less that needs no permit does not need a license.

Check a contractor before you hire

Russell requires contractors to hold one of the local licenses above and insurance. Ask for a copy of each.

Russell contractor list Check a Kansas license

Good to know

  • The code section on fees calls them annual fees, while the renewal sections and the 2025-2026 application set two-year license terms; the application lists one fee per license type.13

  • The code says licenses require proof of surety, but the article does not set a bond amount.3

Common questions

Do I need a contractor license to work in Russell?

Yes. Russell has 4 license types (General and building contractor license; Plumbing or gas fitter, mechanical (HVAC) and electrical contractor license; Roofing contractor license; Limited contractor license). You need the one that fits your work, plus any Kansas license your trade needs.

How much does a Russell contractor license cost?

It depends on the license type. General and building contractor license: $400 (general contractor, initial or non-consecutive renewal). Plumbing or gas fitter, mechanical (HVAC) and electrical contractor license: $300 (each trade, initial or non-consecutive renewal). Roofing contractor license: $200 (initial or non-consecutive renewal). Limited contractor license: $200 (initial or non-consecutive renewal (each type)).

Can a homeowner pull a permit in Russell?

The owner of a single-family home used only as the owner's residence, including usual accessory buildings, is exempt from contractor licensing and may get a building permit if the owner buys and installs all materials and the work passes city inspection. Contractor-type work worth $250 or less that needs no permit does not need a license.

How long is a Russell contractor license good for?

Two-year licenses run from January 1 of an odd-numbered year to December 31 of the next even-numbered year. Late renewals pay the new-license fee and must show 12 hours of continuing education.

Sources

3 official pages, checked November 10, 2026
  1. 2025-2026 Contractor License Application · City of Russell · checked 2026-11-10
  2. Licensed Contractors (PDF, November 18, 2025) · City of Russell · checked 2026-11-10
  3. City Code Chapter 4, Article 8, Electricians, Plumbers, Mechanical Contractors and General Contractors Licenses · City of Russell (published by Citycode) · checked 2026-11-10

Rules change. Confirm with the agency before you bid or start work. How we research

Other places in Kansas